Head Protection

		College V-Gard® Caps College V-Gard Caps meet or exceed all applicable requirements for ANSI Z89.1-2003 for a Type I helmet. Product Information The College line of V-Gard Caps with the comfortable strap-adjustable 1-Touch® Suspension offers superior quality, comfort, and protection. Safety directors appreciate how College V-Gard Caps complement their safety programs. When more workers are inclined to wear them, wearer acceptance is improved. Display your loyalty to your favorite college team with MSA’s new officially licensed College line of V-Gard Caps. Click for pricing and brochures.
		Comfo-Cap® Protective Headwear Used in the mining industry for head protection and featuring a low-crown clearance for work in low-ceiling areas and a lamp bracket and cord holder to support a miner's lamp. Made of lightweight, tough polycarbonate plastic, the shell resists top impacts. Molded cross ridges on the crown provide increased strength and rigidity. The cap's peak helps protect the wearer's eyes and face from small falling objects. The Comfo-Cap is not designed to protect against lateral blows from the front, side or rear. If lateral protection is desired, see MSA's lateral protective helmets. Click for pricing and brochures.
		Plastic Bump Cap Protects the scalp by reducing exposure to abrasions and lacerations caused by minor bumps to the head. Designed for applications in workplaces such as meat packing, food processing, pest control, meter reading and automotive repair. Bump caps are appropriate only for work situations which do not require ANSI-compliant head protection. Durable, molded from high-density polyethylene. Perforated sides allow cross ventilation for better air circulation. Adjustable sizing of 6-1/2 to 8 inches accommodates different head sizes and is easy to use. Cool and lightweight, comfortable and easy to clean ... Click for pricing and brochures.
		SkullGard® Protective Caps and Hats SEI Certified and meets or exceeds the applicable requirements for a Type 1 helmet (top impact) as outlined in ANSI Z89.1 2003, Class G (electrical-low voltage). WARNING: Do not mix suspension and helmet sizes. Make sure the sizes match (i.e., standard-size suspension with standard-size helmet). Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death. Click for pricing and brochures.
		SmoothDome™ Slotted Cap MSA’s new SmoothDome Slotted Cap is a tough, lightweight helmet with a Fas-Trac® Suspension. It provides comfortable head protection for workers in industries who need head protection from small falling objects. Its good dielectric properties (nonconduction of electrical current) benefit workers with those concerns, and its smooth silhouette is welcomed by welders, especially those in shipbuilding and general construction. And some workers simply prefer wearing a smooth-crowned hard hat! The SmoothDome Cap has its own distinctive Fas-Trac Suspension, defined by its bright orange crown strap... Click for pricing and brochures.
		Thermalgard® Caps and Hats Lightweight, high-strength, smooth crown helmets intended for use where workers may need a helmet with elevated temperature capability. The injection-molded, rivetless shell of glass-reinforced nylon has a beaded edge for improved rigidity. Slots in the cap allow for mounting hearing protection muffs, welding shields and faceshields. Not designed to protect against lateral blows from the front, side or rear. MSA's Vanguard Type II protective helmets are so designed and must be used if lateral protection is desired. Click for pricing and brochures.
		Topgard® HTE Protective Caps Topgard HTE Slotted Caps with Fas-Trac® Suspension are lightweight and durable, and available in five colors: white, yellow, red, blue, and orange. These caps are manufactured for workers in industries where elevated-temperature Class E protection is required. The Topgard HTE also meets NFPA 70E standards for workers who require it. Limited resistance to top impact or penetration is retained through a wide range of temperatures. Topgard HTE caps are not specifically designed to protect against lateral blows from the front, side, or rear. MSA’s Vanguard Type II protective helmets are so d... Click for pricing and brochures.
		Topgard® Protective Caps and Hats Lightweight, durable Topgard slotted caps and non-slotted hats are built for use by utilities and other industries where head protection from falling objects is necessary along with good dielectric properties (non-conduction of electrical current). Limited resistance to top impact or penetration is retained through a wide range of temperatures. Not designed to protect against lateral blows from the front, side or rear. MSA's Vanguard Type II protective helmets must be used if lateral protection is desired. Click for pricing and brochures.
		V-Gard® Advance™ Cap Feature cooling vents along the crown for improved air circulation, a lightweight design for added comfort, lateral contours above the ear for easy integration of hearing protection, an optional four- or six-point ratchet suspension system with a soft, absorbent sweatband and a Glaregard underbrim to reduce reflective glare. V-Gard advance caps are not specifically designed to protect against lateral blows from the front, side or rear. MSA's Vanguard protective helmets must be used if lateral protection is desired. Click for pricing and brochures.
		V-Gard® Freedom Series Caps Hardhat wearers can express their patriotism and protect their heads by wearing one of MSA’s new special series of Freedom caps. The bright designs on the cap’s .030-inch thick vacuum-formed glossy cover are very attractive and have a superior finish. Available in two V-Gard cap styles, an American flag design with stars and stripes on each side and a Canadian design featuring a red maple leaf graphic on a white helmet. MSA’s Fas-Trac® suspension ensures the caps are lightweight, durable and comfortable. Accessory slots accept all MSA V-Gard accessories and your logo can be custom imprinted on... Click for pricing and brochures.
		V-Gard® NFL Helmets NFL Officially Licenses V-Gard® Slotted Caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E), and also as outlined in CSA Z94.1-2005 (Class E) with 1-Touch® and Fas-Trac® Suspensions. NFL V-Gard Caps also meet the ANSI/ISEA Z89.1-2009 voluntary standard for reverse donning. WARNING: Do not mix suspension and helmet sizes. Make sure the sizes match (i.e., standard-size suspension with standard-size helmet). Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of ... Click for pricing and brochures.
		V-Gard® Protective Caps and Hats Consist of a polyethylene shell and suspension working together as a protection system. Cap or hat styles, available in three cap sizes, small (6 to 7-1/8 inches), standard (6-1/2 to 8 inches) and large (7-1/2 to 8-1/2 inches) and the hat is 6-1/2 to 8 inches. Click for pricing and brochures.